Palight® Trimboard
Mouldings

Details matter when it comes to the finishing touches for a deck, addition, or remodeling project. Palight® Trimboard Mouldings are the perfect complement to Palight® Trimboard. Made from foam PVC, they’re lightweight, simple to cut and install, and designed to last.

LIGHTWEIGHT. EASY TO CUT AND MITER. DESIGNED TO LAST.
Mouldings are ideal for:

  • Window and door surrounds
  • Post wrap accents
  • Exterior ceilings
  • Any decorative trimboard adornment
Profile ImageProfileColorsLength
3" CrownWhite16'
4" CrownWhite16'
5" CrownWhite16'
6" CrownWhite16'
Adams CasingWhite16'
Back BandWhite16'
Base CapWhite16'
Bed MouldWhite16'
Brick MouldWhite16'
Brick Mould with FinWhite16'
Drip CapWhite16'
Historic SillWhite16'
Large Historic SillWhite16'
Quarter RoundWhite16'
Rake MouldWhite16'
Rams CrownWhite16'
Scotia CoveWhite16'
Shingle MouldWhite16'
Solid CrownWhite16'
Sub Nose SillWhite16'
Weather StopWhite16'
PropertyConditions (U.S. Customary)ASTM MethodUnits - SI (U.S. Customary)Value
(U.S. Customary)
Physical
DensityD-1505g/cm³ (lb/ft³)0.55-0.60 (35)
Water Absorption24 hr. @ 23°CD-570%0.5
Mechanical
Tensile strength at yield10 mm/min (0.4 in./min)D-638MPa (psi)15 (2,200)
Tensile strength at break10 mm/min (0.4 in./min)D-638MPa (psi)14.5 (2,100)
Elongation at yield10 mm/min (0.4 in./min)D-638%5
Elongation at break10 mm/min (0.4 in./min)D-638%40
Flexural Modulus1.3 mm/min (0.05D-790MPa (psi)896 (130,000)
Flexural Strength at Yield1.3 mm/min (0.05D-790MPa (psi)28 (4,000)
Hardness (Shore D)DurometerShore D52-58
Thermal
Long Term Service Temperature
°C (°F)-15 to 55 (14 to 131)
Heat Deflection TemperatureLoad: 1.82 Mpa (264 psi)D-648°C (°F)60 (140)
Coefficient of Linear Thermal ExpansionD-69610-⁵/°C (10-⁵/°F)6.7 (3.7)
Thermal ConductivityC-177W/m°K (Btu-in./hr-ft²-°F).87 (0.5)
Electrical
Surface ResistanceKetleyD-257Ohm5 x 10^15
Volume ResistanceKetleyD-257Ohm-cm2 x 10^16